PORSCHE 911 MUFFLER KIT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
More loud, pronounced and aggressive than our TUV version. This muffler is extremely civilized while cruising but unleashes lower deeper tones and a higher pitched rasp in the higher rpms under full load. This is the perfect choice if you are only planning to change your muffler. If you have sport cats this muffler will be considerably louder under full load but should still be civilized enough for cruising. - + 5 crank hp & + 4 crank torque. - total weight is 25 lbs. (11.24 kg). That is a savings of 15 lbs. - t 304 stainless steel (polished). - made in europe. - simple bolt on, modifications are not necessary. - no dme / ecu programming is necessary. We recommend purchasing replacing your aging muffler straps,...(choose a part on the right to read more)
General Fitment 911 1994-98
From $1,316.32
Make a selection
Factory muffler conversion, which includes modifications to the internals and the addition of 200 cell hjs tri metal sport cats. This creates an enhanced Porsche® factory sound that is deeper and louder sound without drone inside the cabin. Performance is enhanced by +20 hp and +18 tq.
This exhaust is sold on an exchange basis. Send us your original exhaust and we will modify it and send it back.
Installation recommendation: replace worn hardware and gaskets with one of our prepackaged installation kits. Use part # FVD mk9 970 02
General Fitment 911 TURBO/GT2 2007-09
$4,947.71
Make a selection
The Porsche 997 is an easy car to make power with. However, you need to choose the correct products to gain performance properly. Agency power has designed this muffler system for the Porsche 997 to give your car a great sound and add over 10 wheel horsepower! Tested in proper conditions on a mustang dynamometer, this exhaust system repeatedly added horsepower to our stock 997 Carrera.
Porsche owners desire an exotic sports car sound with improved power. When you bolt on the ap mufflers, you get better throttle response with the reduced restriction. The car will scream at the high rpm, yet have no droning sound while at cruising speeds. The agency power muffler kit is made from 321stainless steel. The entire...(choose a part on the right to read more)
General Fitment 911 2005-08
Exhaust system with valves for the 997 -08
Facts:
- equal length headers with long tube design
- 100 cell German hjs sport catalysts with u torque design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,792.70
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 1 x 3.5"(90mm) oval tip
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled qualit...(choose a part on the right to read more)
General Fitment 911 1989-94
$8,518.40
Make a selection
For all 993 turbo and GT2
- 19kw (25ps) more power
- larger pipe guide (75mm)
- expanded at the pipe diameter and exit (20% more).
- up to 75% less backpressure
The OEM system has at its narrowest point only 55 mm pipe guide.
Our system is at the narrowest point 20% (64mm) larger.
Whats in the box:
2 x headers with heat ducts
2 x 200 cell trimetal catalytics
2 x rear mufflers
2 x Ø90mm end tips oval
1 x mounting kit
FVD exhaust systems carry a 2 year warranty!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
$10,794.30
Make a selection
For all 993 turbo and GT2
- 19kw (25ps) more power
- larger pipe guide (75mm)
- expanded at the pipe diameter and exit (20% more).
- up to 75% less backpressure
The OEM system has at its narrowest point only 55 mm pipe guide.
Our system is at the narrowest point 20% (64mm) larger.
Whats in the box:
2 x headers with heat ducts
2 x 200 cell trimetal catalytics
2 x rear mufflers
1 x mounting kit
FVD exhaust systems carry a 2 year warranty!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
$9,235.60
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 60...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,835.10
Make a selection
Brombacher 997 tt stainless steel race pipes
Facts:
- + 35 crank hp & + 25 crank torque
- 3" tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- bolts up to the turbochargers, replacing both the cats and the muffler.
- reduces turbo lag and backpressure.
- exhaust tips are not included! Stock tips will fit.
- intoxicating growl at idle, partial throttle and wide open throttle.
- made in Germany
- programming or o2 sensor simulators are necessary, as the lack of catalytic converters will throw the check engine light. (see part numbers below)
Figures:
Genuine:
Engine - 6 cylinder...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $456.50
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- catalytic bypass
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup car. Our exhaust ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,331.80
Make a selection
The perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed. Torque is better than our other systems in the low range with the valves closed and horsepower is better with the valves open. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 27 crank hp & +25 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 3.5" (90 mm) dual oval, double walled polished tips included. - dual high quality ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $11,730.62
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup c...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,996.00
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with 2 x 90mm tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs ?hd? Sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) saving?s over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- intox...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,702.68
Make a selection
Exhaust system with valves for the 997 -08
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (incl...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,385.20
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quali...(choose a part on the right to read more)
General Fitment 911 1989-94
$7,854.00
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with rsr style tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs "hd" sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) savings over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- into...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,106.10
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
Special order item !
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (includes FVD software, sport airfilter and exhaust):
Max. Power - 283kw (3...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,826.40
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,581.70
Make a selection
B&b started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded us impressive horsepower and torque gains throughout the entire power band. Headers and muffler are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed! Included in the kit is the header set, 1.625" or 1.75" primary tube diameter, with or without heat exchangers. Their proprietary twin inlet muffler built specifically for your street or race application is also included in this complete exhaust system. The kit for the naturally aspirated Porsche 911 includes all necessary hardware, gaskets and accessroies ne...(choose a part on the right to read more)
General Fitment 911 1984-86 911 1974-77
$3,579.69
Make a selection
Product details:
Complete header-back performance exhaust system for 997 Carreras fitted with a GT3 bumper kit; package includes maxflo performance mufflers, sportcat x-pipe, and GT3 outlet extension tips.
Features:
-fits all Porsche 997 Carrera vehicles from 2005-2008
-system maintains the original 997 Carrera exhaust/muffler position but features longer outlet extensions with slip-on 3.5” polished tips which exit at the center of GT3-style bumpers
-constructed from 14-16 gauge t304 stainless steel
-simple diy bolt-on installation; no cutting or welding required
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 2005-08 911 GT3 2007-11
$4,195.00
Make a selection
Race exhaust system - 2 x header system 42mm - 1 x tube set - 1 x muffler - 1 x hardware kit
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1970-73
From $3,875.30
Make a selection
This kit replaces the end mufflers on the 997 for an incredible sound! They feature quad tips that come directly off of the catalytics!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 2005-08
From $654.50
Make a selection
Bolt on up to 15% increase in hp and incredible sound.
Combination ssi heat exchangers and sport muffler. Conversion kit inc.oil lines, gaskets and nuts.
For heater funtion you must order with it FVD 211328490
General Fitment 911 1970-73
From $4,027.88
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|